High Voltage Test Set PGK 70 HB The two-part test sets PGK HB generate variable AC test voltages of mains frequency or DC voltages of positive or negative polarity. The operating unit in 19“design has a voltage and current display, safety control elements according to VDE 0104 and a variable transformer for voltage adjustment. The high voltage unit contains an oil insulated high voltage transformer and, depending on the desired operation mode, a rectifier rod or a resistor rod. The polarity of the DC test voltage can be changed by reversing the rectifier in the high voltage unit. Features: ●absolutely maintenance-free design ●stepless adjustable output voltage ●safety control according to VDE 0104 ●short-circuit protected by internal current limitation ●voltage indication: 2 range analogue meter, ratio 1:3 ●current measurement: 3 range analogue meter, decadic ●thermal overcurrent switch-off Technical data PGK 70 HB 220- 240 V Mains supply 110- 120 V with external autotransformer Mains frequency 45Hzupto60Hz Power consumption 640 VA l Power consumption short-circuit 1200 VA Nominal output voltage AC rms / DC 55kV / 70 kV Output current cont. AC rms/ DC 7mA/3mA Short-circuit current AC rms/ DC 20 mA/ 12 mA Relative humidity not condensing Ambient temperature working: 0...+45°C storage: - 20 ... + 60 °C l Precision of the kV-meter 2,5 % Precision of the mA-meter 2,5 % Dimension control unit housing (W xH x D) 502x241x290mm_ Dimension High Voltage part (height / diameter) 810mm/385mm Weight control unit 13,5 kg Weight High Voltage unit 26 kg High Voltage Test Set PGK 70 HB Delivery includes: 41 1+010 ●High voltage test set PGK 70 HB without accessories Discharge rod ES 70; 12 kWs ●Connection cable HV unit - operating unit; 5 m long ●Ground line 3 m long ●HV connection cable, approx. 2.5 m long; with crocodile clip Key for changing of rectifier rod / resistance rod Rectifier rod for DC voltage operation; incorporated in HV unit Resistance rod for AC voltage operation Mains connection cable User Manual Options: Hinged stand for 19" units up to 5U; working height approx. 90 cm Automatic discharge device EM 70; 20 kWs External Emergency-Off unit with signal lamps; cable length 25 m ●External Emergency-Off unit with signal lamps; cable length 50 m ●Transport case for operating unit (W x H x D) approx. 626 x 383 X 382 mm Transport case for HV unit (W x H X D) approx. 440 X 940 X 440 mm PGK 70 HB高压测试仪器产品简介：
•使用 BAUR PGK HB 进行电缆测试和诊断
•很少能有测试仪比 PGK HB 系列中的两件式高压测试仪具有更长寿命、更加牢固和经济
•它可以生成具有电网频率的连续可调测试电压或具有正、负很性的直流电压
•操作单元内置了电流和电压指示仪、安全控制装置和用于选择电压的电压调节变压器
PGK 70 HB高压测试仪器产品特点：
•测试中压和高压电缆
•很高可使用带有正、负很性的 70 kV 输出电压进行直流电压测试
•可对开关设备、母线和绝缘元件进行很高 55 kV 的交流电压测试
•易于管理的 2 件式结构 PGK 70 HB高压测试仪器标准配件：
•AC/DC 高压测试设备
•放电杆和接地杆 GDR 80-500
•5 m 连接电缆，用于将高压单元连接到操作单元
•3 m 地线
•2.5 m 高压连接电缆，带有鳄鱼夹
•用于安装整流棒和电阻棒的螺丝扳手
•用于 DC 运行的整流棒，内置于高压单元
•用于 AC 运行的电阻棒
•2.5 m 电源线
•使用说明书 选项:
•折叠三脚架，高 5 机架单位，适用于 19" 仪器
•自动放电装置 EM 70；20 kWs
•用于 PGK 70 HB 操作单元的运输箱，高 5 机架单位，深 260 mm
•用于 PGK 70 HB 高压单元的运输箱
•配备信号灯的外部紧急断电装置，包含25 m 连接电缆
•配备信号灯的外部紧急断电装置，包含50 m 连接电缆
•外部自耦变压器 110/230 V；1.5 kVA
•电阻棒
•整流棒 信息整理：扬州拓普电气科技有限公司 |
